STINT
Preorders open · ships from late November
Preorder

SPECIFICATIONS

Specifications

Figures come from the specification summary in the user manual. Battery life varies with sample rate and how long the screen stays lit.

Display and controls

Display240 × 240 full-colour TFT
ButtonsFour physical buttons (UP / DOWN / OK / BACK) + backlight button (doubles as LAP during a session)
Watch faces8
Other featuresTime, alarm, compass, barometer

Positioning

Built-in GNSSSony CXD5605GF, supporting GPS / GLONASS / BeiDou / Galileo / QZSS / SBAS
Positioning accuracy2DRMS 1.0 m (at a signal strength of −130 dBm)
Time to first fixAbout 35 s cold start; about 2 s hot start (real-world times depend on how much sky is obstructed)
GPS sourceBuilt-in GPS / external RaceBox Mini (Bluetooth, with G-force) / external Qstarz BL-1000GT, BL-818GT (Bluetooth)
Data update rateRaceBox Mini up to 25 Hz; built-in GPS up to 5 Hz (1 Hz in power-saving mode); Qstarz about 5.6 Hz

Sensors

Motion3-axis accelerometer + 3-axis magnetometer (compass, vehicle roll and pitch)
BarometerBarometric sensor (altitude and pressure trend)

Connectivity and records

ConnectivityBluetooth (phone app, RaceBox, Qstarz); USB (charging, reading records on a computer)
RecordsUp to 300 records browsable on the watch; up to 200 laps per session
Phone appiPhone

Power

BatteryRechargeable lithium battery
Battery lifeAbout 3 months on standby (not recording); about 1–2 weeks with daily wear and ordinary logging; about 8–12 hours with GPS and sensors running continuously
ChargingSupplied charging clip, USB; about 1 hour to 80%

Physical

Water resistance50 m (5 ATM). Fine for swimming, rain and washing your hands; not for diving, jumping into water or high-speed water sports, and keep it away from steam rooms, saunas, hot springs and hot showers.
StrapBlack: silicone strap; white: woven strap

Platform

ProcessorMediaTek MT2523 (ARM Cortex-M4), 104 MHz
Memory4 MB RAM; 4 MB flash

More detail is in the user manual.

Three GPS sources, switchable on the watch
STINT ROUTE track screen: start/finish S/F, LAT / BRK / ACC
Actual device screen

Switchable GPS source

Use the built-in GPS day to day. When you need a higher sample rate, pair a RaceBox Mini or a Qstarz — no need to change watches.

Samples per second

External RaceBox Mini

25 Hz positioning with measured g-force — suitable for track and acceleration logging.
25 Hz

External Qstarz

BL-1000GT and BL-818GT supported; about 5.6 Hz in our tests, no g-force.
5.6 Hz

Built-in GPS

5 Hz built in, switchable to 1 Hz to save battery; g-force is a derived value.
5 Hz

All three sources use the same recording format and sync to the app.